home *** CD-ROM | disk | FTP | other *** search
- This is a set of MFJ1278 parameters which I have put together from
- several sets sent to me by users. I have never used an MFJ TNC, but
- the packet parameters seem to be more or less standard TNC2. Please
- note that this list does not include settings for the channel
- occupancy parameters such as DWAIT, PACLEN, FRACK, RESPTIME, MAXFRAME,
- etc - these should be set according to local conditions irrespective
- of what program you are using.
-
- I believe the MFJ1278 has several modes available, so you must also
- use the appropriate command to put the TNC into packet mode.
-
- 8BITCONV ON
- AUTOLF ON
- AWLEN 8
- AX25L2V2 ON
- CMDTIME 1
- CMSG ON
- CONMODE CONVERSE
- CONOK ON
- CPACTIME OFF
- CR ON
- CTEXT Welcome to WinPack. Send /HELP for help...
- COMMAND $03
- ECHO OFF
- FLOW ON
- HEADERLN ON
- LFADD OFF
- LFIGNORE OFF
- MCON OFF
- MONITOR ON
- MYCALL <your callsign>
- NEWMODE ON
- NOMODE OFF
- NUCR OFF
- NULF OFF
- PARITY 0
- RXBLOCK OFF
- SENDPAC $0D
- STREAMCA OFF
- STREAMDB OFF
- STREAMSW $00
- TRFLOW OFF
- TXFLOW OFF
- UNPROTO <your local BBS callsign>
- USERS 1
- XFLOW OFF
- XMITOK ON
-